Top 10 Best Open Source Home Automation 2022

Last Update:

Our team studied on 63658 reviews available online for Open Source Home Automation, chose the finest ones and prepared Open Source Home Automation Reviews for you. It was very difficult to shortlist the ideal Open Source Home Automation from thousands of products online. However, We tried to make sure that you get only the Best Open Source Home Automation from our suggestions. Check our listings-:

Best Open Source Home Automation
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Shelly 1 One PM Smart Relay Switch WiFi Open Source Wireless Home Automation iOS Android Application (1 Pack) UL Certified9.8Buy on Amazon
2Kasa Smart Light Switch HS2009.6Buy on Amazon
3Shelly 2.5 Double Relay Switch and Roller Shutter WiFi Open Source Wireless Home Automation Dual Power Metering iOS Android Application (1 Pack)9.4Buy on Amazon
4Honeywell Intrusion 5800PIR-RES WIRLESS PIR9.2Buy on Amazon
5Wyze Plug Outdoor, Dual Outlets Energy Monitoring9Buy on Amazon
6Hubitat Elevation Home Automation Hub - Compatible with Alexa9Buy on Amazon
7SAMSUNG SmartThings Smart Home Hub 2nd Generation8.6Buy on Amazon
8Kasa Smart Plug HS103P48.6Buy on Amazon
9Shelly 1 One PM Smart Relay Switch WiFi Open Source Wireless Home Automation iOS Android Application (4 Pack) NON UL8.4Buy on Amazon
10Emporia Smart Home Energy Monitor with 16 50A Circuit Level Sensors - Real Time Electricity Monitor/Meter - Solar/Net Metering8.2Buy on Amazon

Comparison Chart for Best Open Source Home Automation

63658 reviews were considered when writing our recommendations for the Open Source Home Automation in this article.

Table Of Content:

1. Shelly 1 One PM Smart Relay Switch WiFi Open Source Wireless Home Automation iOS Android Application (1 Pack) UL Certified

  • EMBEDDED WEBSERVER – Shelly 1 PM Whas an embedded web server
  • COMPACT DESIGN – Fit it everywhere, measure everything and control it remotely.
  • CONTROL YOUR HOME – Use Shelly as an accessory to a home automation controller, or it may be used as another automation system’s component.
  • ENERGY CONSUMPTION MONITORING – Shelly can be used for electrical circuits (up to 3.

2. Kasa Smart Light Switch HS200

  • Easy guided install: Neutral wire is required, standard wall plate size.
  • Control from anywhere: Monitor your light status.
  • Voice control: Enjoy the hands-free convenience of controlling the lights in your home with your voice via Amazon Alexa or Google Assistant; perfect for times when your hands are full or entering a dark room.
  • Scheduling: Use timer or countdown schedules to set your smart switch to automatically turn on and off while you’re home or away.
  • Trusted and reliable: Designed and developed in silicon valley, Kasa is trusted by over 4 million users.

3. Shelly 2.5 Double Relay Switch and Roller Shutter WiFi Open Source Wireless Home Automation Dual Power Metering iOS Android Application (1 Pack)

  • EMBEDDED WEB SERVER – You can set up Shelly without the need of any additional controller or hub, thanks to the embedded web interface.
  • COMPACT DESIGN – Shelly 2.
  • COMPATIBLE for two electrical circuits (up to 2.
  • BI-DIRECTIONAL MOTOR CONTROL MODULE – for drapes, blinds, garage doors, etc.).
  • STANDALONE DEVICE – can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.

4. Honeywell Intrusion 5800PIR-RES WIRLESS PIR

  • Range 35 x 40 (11 m x 12 m) pattern
  • 80 lbs (36 Kg) of animal immunity
  • No mounting height adjustments
  • PCB does not need to be removed to install on wall
  • 7′-9′ mounting height

5. Wyze Plug Outdoor

  • Consume less energy: Set energy consumption alerts and see historical energy usage in the Wyze app.
  • Long-range WiFi: Confidently control outlets around your home with Wyze Plug Outdoor’s extended WiFi range (300 ft.
  • Made for the outdoors: IP64 Weather Resistant.
  • Two outlets in one: Independent control of both outlets at any given time.
  • App & Voice Control: Turn your lights off without putting your boots on.

6. Hubitat Elevation Home Automation Hub – Compatible with Alexa

  • New Z-Wave 700 radio supports S2 security and SmartStart device inclusion (Model C-7 hub)

7. SAMSUNG SmartThings Smart Home Hub 2nd Generation

  • Your smart home needs a brain, so get started with a SmartThings Hub.
  • Add smart devices and put your home to work.
  • Use the SmartThings app or Amazon Alexa to control your smart home.
  • Power: In-wall power adapter with about 10 hours of backup power from 4 AA batteries (included) Communication.
  • Requires an internet-connected Wi-Fi router with an available Ethernet port, plus the free SmartThings app for Android (4.
  • Compatible Brands: Honeywell, Philips Hue, Kwikset
  • A more powerful processor and local app engine means faster performance and enabled offline processing.
  • Hub connects to your Internet router via the included Ethernet cable, the Hub has a ZigBee, Z-Wave, and Bluetooth radio and also supports selected IP-accessible devices.
  • Replaceable batteries provide backup power that keeps the hub operating locally for about 2 hours if there’s a power outage.
  • Please reference User Guide and Specification Sheet below under ‘Technical Specifications’ for instructions on how to add devices and troubleshoot connectivity issues.
  • Kindly refer user manual and instruction video for reference
  • Hub connects all of the different smart devices around your home so you can remotely control your home’s security, energy usage, lighting, and more, Range: More than 50 to 100-feet, Power Source: In-wall AC (100-240V).

8. Kasa Smart Plug HS103P4

  • Voice control: Kasa smart plugs that work with Alexa and Google Home Assistant.
  • Smart Outlet Control from anywhere: Turn electronics on and off your smart home devices from anywhere with your smartphone using the case app, whether you are at home, in the office or on vacation.
  • Scheduling: Use timer or countdown schedules to set your wifi smart plug to automatically turn on and off any home electronic appliances such as lamps, fan, humidifier, Christmas lights etc.
  • Easy set up and use: 2.
  • Trusted and reliable: Designed and developed in Silicon Valley, Kasa is trusted by over 5 Million users and being the reader’s choice for PCMag 2020.

9. Shelly 1 One PM Smart Relay Switch WiFi Open Source Wireless Home Automation iOS Android Application (4 Pack) NON UL

  • EMBEDDED WEBSERVER – Shelly 1 PM Whas an embedded web server
  • COMPACT DESIGN – Fit it everywhere, measure everything and control it remotely.
  • CONTROL YOUR HOME – Use Shelly as an accessory to a home automation controller, or it may be used as another automation system’s component.
  • ENERGY CONSUMPTION MONITORING – Shelly can be used for electrical circuits (up to 3.

10. Emporia Smart Home Energy Monitor with 16 50A Circuit Level Sensors - Real Time Electricity Monitor/Meter - Solar/Net Metering

  • INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors.
  • 24/7 ENERGY MONITORING: Monitor your home’s real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs.
  • APPLIANCE MONITORING WITHOUT GUESSWORK: Comes with sixteen (16) 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc.
  • LOWER YOUR ELECTRIC BILL: Gauge real-time spending and get actionable notifications to understand where you can save costs.
  • REAL-TIME ENERGY DATA: REQUIRES 2.

Open Source Home Automation Buying Guide


Does the thought of finding a great Open Source Home Automation stress you out? Has your mind been juggling between choices when it comes to buying Open Source Home Automation in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Open Source Home Automation for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Open Source Home Automation Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Open Source Home Automation in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Open Source Home Automation currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Open Source Home Automation brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Open Source Home Automation based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Open Source Home Automation before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Open Source Home Automation they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Open Source Home Automation, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Open Source Home Automation before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Open Source Home Automation will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Open Source Home Automation if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Open Source Home Automation on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Open Source Home Automation on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Open Source Home Automation featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a comment:

Leave a comment: