Top 10 Best Coil Spring Compressor Tool 2022

Last Update:

You can trust our selection for Coil Spring Compressor Tool Reviews. Because We have worked hard studying and analyzing 60675 reviews for Coil Spring Compressor Tool and rating them. It was a difficult job to list only ten products for Coil Spring Compressor Tool where thousands of them available online. I hope it will help you to take final decision for Best Coil Spring Compressor Tool.

Best Coil Spring Compressor Tool
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1OEMTOOLS 27035 Coil Spring Compressor9.8Buy on Amazon
2648628 Coil Sprng Compressor Kit9.8Buy on Amazon
3370mm Drop Forged Coil Spring Compressor - 2 Steel Jaw Claws to Wrap Coil Spring Safely9.8Buy on Amazon
4Shankly Spring Compressor Tool (2 Pieces) - Heavy Duty Build9.6Buy on Amazon
5ABN 11.5in Strut Spring Compressor Tool – Set of 2 (Pair) – Macpherson Spring Compression9.6Buy on Amazon
6Performance Tool W89311 Coil Spring Compressor for Vehicle Maintenance and Repair with Tempered Chrome Steel Jaws in Blow Molded Storage Case9.4Buy on Amazon
7Coil Spring Compressor Tool9.2Buy on Amazon
8dynofit Solid Coil Spring Compressor Tool9.2Buy on Amazon
9OTC Tools 6637 Strut Tamer II Extreme9.2Buy on Amazon
10Branick 7600 Strut Spring Compressor8.2Buy on Amazon

Comparison Chart for Best Coil Spring Compressor Tool

Our team scanned 60675 reviews before putting any suggestions for the Coil Spring Compressor Tool in this article.

Table Of Content:

1. OEMTOOLS 27035 Coil Spring Compressor

  • COIL SPRING COMPRESSOR

2. 648628 Coil Sprng Compressor Kit

  • Oxygen sensor socket set
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • Remove and install straight or curved springs made of wire up to 3/4″ in diameter
  • Made of strong chrome vanadium
  • Tool set for removal and installation the automotive coil spring
  • Works on straight or curved coil springs
  • Black oxide and chrome finish
  • Storage case includes usage photos
  • Kit 2 includes 1-Piece for removal and installation the coil spring
  • Tool set for removal and installation the automotive coil spring
  • Works on straight or curved coil springs
  • Black oxide and chrome finish
  • Storage case includes usage photos
  • Kit 2 includes 1-Piece for removal and installation the coil spring

3. 370mm Drop Forged Coil Spring Compressor – 2 Steel Jaw Claws to Wrap Coil Spring Safely

  • LIMITED SPACE, NO PROBLEM: Shankly’s coil spring compressor kit is designed for use in limited space under the wheel arch.
  • STRONG GRIP: This spring coil compressor features specially crafted claws which enhance safety by wrapping around coils for a sure grip.
  • VERSATILE FIT: Works well with springs between 90-370mm. Maximum jaw opening is 370mm.
  • ONE YEAR WARRANTY: Actions speak louder than words.
  • DROP FORGED CR-V STEEL: Shankly’s coil spring compressor tool is built with heat treated, high quality CR-V steel to ensure you obtain a professional job performance every time.

4. Shankly Spring Compressor Tool (2 Pieces) – Heavy Duty Build

  • RUGGED AND DURABLE FRAME: Shankly’s heavy duty spring compressor for struts and coil springs reduces tool flexing, bending, and warping, providing confidence to the mechanic.
  • LARGE CARS AND TRUCKS, NO PROBLEM: Many coil spring compressor tools slip and buckle under high tension, Shankly’s heavy duty spring compressor tool bears 1000 kg maximum capacity per pair.
  • STRONG AND SECURE HOOKS REDUCE SLIPPAGE: Avoid strut compressors with flimsy hooks creating slippage and other safety problems.
  • UNIVERSAL COMPRESSOR TOOL: Wide jaw capacity (23 mm – 280 mm) make Shankly’s coil spring compressor tool is ideal for a range of vehicles, assisting the mechanic with years of compression jobs.
  • IMPORTANT SAFETY INSTRUCTIONS: Coil spring tool work can be dangerous.

5. ABN 11.5in Strut Spring Compressor Tool – Set of 2 (Pair) – Macpherson Spring Compression

  • EASY TO USE: Use the ABN 11.
  • LOCKS INTO PLACE: Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • WIDE RANGE OF COMPATIBILITY: Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.
  • BUILT TO LAST: Constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.

6. Performance Tool W89311 Coil Spring Compressor for Vehicle Maintenance and Repair with Tempered Chrome Steel Jaws in Blow Molded Storage Case

  • For use on most automotive and light truck applications
  • Chrome moly steel jaws
  • Replacement part availability
  • CONVENIENT: Simple design makes this tool quick and easy to place and remove

7. Coil Spring Compressor Tool

  • Heavy Duty 11-4/5” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2″ Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.
  • Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice.
  • Orion Motor Tech pursue outstanding quality and 2-YEAR WARRANTY service, only have point of departure, there is no terminal point.

8. dynofit Solid Coil Spring Compressor Tool

  • Fitment: universal for small,medium and most thick coil spring, not fit very thick wire(OD>5/8inch), as full sized truck or heavy duty owner, you’d better check this OD.
  • Nice Safety Feature:little pins that keep the compressor from flying off the coil spring.
  • Tightening End:as well as a half inch square drive(1/2″ ratchet hole) you can use a 7/8 inch socket.
  • Strong:constructed of nice quality materials(updated)-impact gun is not recommended due to safety but can be used if needed.
  • Package: the included case is great for storage and keeping them clean, free from dust and cobwebs

9. OTC Tools 6637 Strut Tamer II Extreme

  • New forged Locking jaws Includes larger pads and offset to clamp onto and compress springs even tighter than before.
  • New extra thick 5/8 inch compression arms for superior strength, stability and safety
  • New Locking trunions for optimal stability during spring compression
  • New arm-locking rings eliminate the need for tools to adjust
  • Assembled in USA

10. Branick 7600 Strut Spring Compressor

  • No adaptors required
  • Heavy duty acme thread
  • Versatile mounting options
  • Multi-position hooks
  • All steel construction

Coil Spring Compressor Tool Buying Guide


Does the thought of finding a great Coil Spring Compressor Tool stress you out? Has your mind been juggling between choices when it comes to buying Coil Spring Compressor Tool in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Coil Spring Compressor Tool for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Coil Spring Compressor Tool Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Coil Spring Compressor Tool in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Coil Spring Compressor Tool currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Coil Spring Compressor Tool brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Coil Spring Compressor Tool based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Coil Spring Compressor Tool before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Coil Spring Compressor Tool they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Coil Spring Compressor Tool, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Coil Spring Compressor Tool before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Coil Spring Compressor Tool will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Coil Spring Compressor Tool if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Coil Spring Compressor Tool on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Coil Spring Compressor Tool on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Coil Spring Compressor Tool featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a comment:

Leave a comment: